Shaking Autoclave

The Ferlo shaking autoclave , bases its operation on that ofthe static autoclave Ferlo. That is, the transmission of hotand cold water through re-movement through exchanging heat plates either in spray or cascade. With an additional lineal movement of up to 60 pulses per minute.

This autoclave is suitable for products that require constant movement during the sterilization process.

With a range of diameters Ø800, Ø1000, Ø1.380 and Ø1.520. Built in stainless steel AISI 304L from 6-10 mm thick.

Characteristics

Maximum working temperature: 150ºC.
Maximum working pressure: 5 bar.
Capacity from 2 to 6 baskets
Machinery built under CE regulations
Heating and cooling of the product by means of recirculating water cascades or sprays.
We pass water through a pump through a stainless steel plate exchanger for indirect heating.
The heating and cooling of the water that we use in all the process cycles is carried out in the plate exchanger by means of steam. or cold water.
Autoclave equipped with an ALLEN BRADLEY process automation panel.

Soups, pures, precooked foods, dairy products, latte, chocolate milk, soya milk.

Prodotti aggiuntivi

Static Autoclave

This autoclave is suitable for products that do not require movement during the sterilization process.

Rotary Autoclave

This system is indicated for products that require movement.

Shaka Autoclave

System suitable for products with high difficulty in penetrating temperature.

ImmersaFlow Autoclave

ImmersaFlow™ is a new static water immersion process which provides unprecedented control of the process media.

Pharmaceutical Autoclave

Ferlo designs and manufactures autoclaves for the pharmaceutical industry meeting the highest international standards of quality for this market.

Basket Loaders & Unloaders

Ferlo develops the most complete range of basketing and unbasting systems because each type of container, each factory, each product and each process has specific requirements.